Breath-A-Tech Peak Flow Meter Low Range
  • Breath-A-Tech Peak Flow Meter Low Range

Breath-A-Tech Peak Flow Meter Low Range

Code: 191377
    The Breath-A-Tech Peak Flow Meter is used to measure peak expiratory flow rate during exhalation
  • Measuring range: Up to 800 L/min
  • Designed to measure asthma symptoms to allow early treatment of asthma
  • Accurate, reliable and easy to use
  • Made from high grade material
  • Comes with a reusable mouthpiece that can be easily cleaned.
P.O.A
Order Now
Please note: Prices are shown including GST (where applicable) and are in AUD$
    The Breath-A-Tech Peak Flow Meter is not to be used for diagnostic purposes or for fully evaluating patient respiratory function
  • Spitting or coughing may affect its function, particularly with small diameter mouthpieces
  • When taking measurement before and after using a pressurised metered dose inhaler, wait 10 minutes
  • Except for the mouthpiece, the Peak Flow Meter must not be dismantled as there are no serviceable components.
    Ensure the white pointer is at the L/MIN position and the mouthpiece is securely attached
  • When holding the Peak Flow Meter, ensure the slot faces upward and that you don’t disturb the movement of the pointer
  • Inhale a deep breath until your lungs are full
  • Holding the Peak Flow Meter horizontally, place the mouth piece in your mouth with the lips forming a tight seal
  • Blow out as hard and as fast as possible
  • Try to get all the air out of your chest within one second
  • Note the scale reading from the position reached by the raised line on the pointer, then return the pointer to the L/min position
  • Record the best of 3 readings.